Hero Description

Real dry carbon fiber dashboard cover for the Tesla Model 3 Highland.

The exposed weave adds sharper surface definition across the front cabin, creating cleaner contrast beneath the windshield and more structured transitions between interior surfaces. More technical under daylight. More detailed from the driver’s seating position.

Autoclave-cured dry carbon fiber construction with tighter weave clarity and reduced weight.

Quick Specs

• Tesla Model 3 Highland (2024+)

• Dashboard Cover

• 100% Real Dry Carbon Fiber

• Autoclave Construction

• Interior Dashboard Trim

• Non-Destructive Installation

Material

Constructed from real dry carbon fiber using an autoclave production process.

Compared to conventional wet carbon fiber construction, the surface provides:

• Cleaner weave consistency

• Reduced resin distortion

• Sharper surface definition

• Lower overall weight

The rigid composite structure also adds additional resistance against light scratches and daily surface contact across the dashboard area.

Fitment

Developed around the factory Model 3 Highland dashboard geometry.

The cover follows the original dashboard contours closely for cleaner alignment and more controlled surface transitions beneath the windshield and around surrounding trim areas. No oversized edges or excessive trim thickness near display sections.

Factory dashboard functionality and visibility remain unchanged after installation.

Appearance

The updated Highland dashboard layout emphasizes long uninterrupted interior surfaces.

Carbon fiber introduces stronger material separation across the front cabin, adding more defined visual layering without disrupting the restrained interior architecture. The exposed weave becomes more noticeable as lighting conditions shift throughout the day.

Especially noticeable under:

• Direct daylight through the windshield

• Ambient cabin lighting

• Nighttime interior reflections

Pairs naturally with carbon fiber steering wheel trim, center console components, and door panel accents.

Before & After

Before installation, the factory dashboard surface can appear visually soft under changing light conditions.

After installation:

• Sharper dashboard definition

• Cleaner material transitions

• More technical surface texture

• Stronger visual structure across the front cabin

The visual change remains restrained from a distance and more detailed at closer viewing angles.

Installation

Non-destructive installation process.

Recommended steps:

1. Clean the dashboard surface thoroughly

2. Ensure the area is fully dry

3. Test-fit all sections before final placement

4. Apply even pressure during installation

No drilling or permanent modification required.

Cleaning

For routine maintenance:

• Use a soft microfiber towel

• Clean with mild interior cleaner

• Wipe dry after cleaning

Avoid:

• Abrasive pads

• Strong solvents

• Rough polishing compounds

Proper care helps preserve weave clarity and carbon fiber surface finish over time.

FAQ

Is this made from real dry carbon fiber?

Yes. The dashboard cover is constructed from 100% real dry carbon fiber using an autoclave curing process.

Will installation affect dashboard functionality?

No. The cover is developed around the factory dashboard layout and does not interfere with normal operation or visibility.

Does the surface create excessive windshield reflections?

The exposed weave creates controlled reflections and sharper material contrast rather than excessive glare.

Will the finish match other Tesla carbon fiber interior parts?

Yes. The weave pattern and finish are intended to pair naturally with other exposed carbon fiber interior components.

Does installation require permanent modification?

No. Installation is fully non-destructive and does not require drilling or permanent changes.