Hero Description

Real dry carbon fiber central control and passenger dashboard trim for the Toyota Supra A90.

The exposed weave adds sharper material contrast across the center dashboard area, creating cleaner separation between the driver controls, passenger-side surfaces, and surrounding cabin panels. More structured under daylight. More technical at close range.

Autoclave-cured dry carbon fiber construction with tighter weave clarity and reduced weight.

Quick Specs

• Toyota Supra A90

• Central Control & Passenger Dashboard Cover Trim

• Real Dry Carbon Fiber

• Autoclave Construction

• Interior Dashboard Trim

• Vehicle-Specific Fitment

Material

Constructed from dry carbon fiber with an autoclave-cured composite structure.

Compared to conventional wet carbon fiber construction, the surface provides:

• Cleaner weave consistency

• Reduced resin distortion

• Sharper material definition

• Lower overall weight

The exposed weave also introduces more controlled reflections across the dashboard area under changing lighting conditions.

Fitment

Developed around the factory dashboard and center control geometry of the Supra A90.

The trim follows the original interior contours closely for cleaner alignment and more controlled surface transitions across the center stack and passenger dashboard area. No oversized edges or excessive trim thickness near control surfaces.

Factory dashboard and center console functionality remain unchanged after installation.

Appearance

The Supra cabin combines layered dashboard surfaces with a strong driver-focused layout.

Carbon fiber introduces stronger material separation across the central control area and passenger dashboard, creating more defined visual structure without overpowering the original interior architecture.

Especially noticeable under:

• Direct daylight through the windshield

• Ambient cabin lighting

• Nighttime dashboard reflections

Pairs naturally with Alcantara interiors, satin metallic trim, and other exposed carbon fiber components.

Before & After

Before installation, the factory dashboard surfaces can appear visually flat under changing light conditions.

After installation:

• Sharper dashboard definition

• Cleaner material transitions

• More technical surface texture

• Stronger visual structure across the front cabin

The visual change remains restrained from a distance and more noticeable during daily driving.

Installation

Non-destructive installation process.

Recommended steps:

1. Clean all dashboard surfaces thoroughly

2. Ensure the area is fully dry

3. Test-fit all sections before final placement

4. Apply even pressure during installation

No drilling or permanent modification required.

Cleaning

For regular maintenance:

• Use a soft microfiber towel

• Clean with mild interior cleaner

• Wipe dry after cleaning

Avoid:

• Abrasive pads

• Strong solvents

• Rough polishing compounds

Proper care helps preserve weave clarity and surface finish over time.

FAQ

Is this made from real dry carbon fiber?

Yes. The dashboard trim is constructed from real dry carbon fiber using an autoclave-cured process.

Will installation affect dashboard or center console functionality?

No. The trim is developed around the factory interior layout and does not interfere with normal operation.

Does the surface create excessive reflections inside the cabin?

The exposed weave creates controlled reflections and sharper material contrast rather than excessive glare.

Will the finish match other Supra carbon fiber interior parts?

Yes. The weave pattern and finish are intended to pair naturally with other exposed carbon fiber interior upgrades.

Does installation require permanent modification?

No. Installation is fully non-destructive and does not require drilling or permanent changes.