Hero Description

Real dry carbon fiber center console armrest cup holder panel cover for the Tesla Model 3 Highland.

The exposed weave adds sharper surface contrast across the center console area, creating cleaner separation between the cup holder section, armrest, and surrounding interior panels. More structured under cabin lighting. More technical at close range.

Autoclave-cured dry carbon fiber construction with tighter weave clarity and reduced weight.

Quick Specs

• Tesla Model 3 Highland (2024+)

• Center Console Armrest Cup Holder Panel Cover

• Real Dry Carbon Fiber

• Autoclave Construction

• Interior Console Trim

• Vehicle-Specific Fitment

Material

Constructed from dry carbon fiber with an autoclave-cured composite structure.

Compared to conventional wet carbon fiber construction, the surface provides:

• Cleaner weave consistency

• Reduced resin distortion

• Sharper material definition

• Lower overall weight

The exposed weave also introduces more controlled reflections across the center console area under changing lighting conditions.

Fitment

Developed around the factory center console geometry of the Tesla Model 3 Highland.

The panel follows the original cup holder and armrest contours closely for cleaner alignment and more controlled surface transitions across high-contact interior areas. No oversized edges or excessive trim thickness around storage or touch surfaces.

Factory console usability remains unchanged after installation.

Appearance

The center console remains one of the most visually active surfaces inside the cabin.

Carbon fiber introduces stronger material layering across the armrest and cup holder section, creating more defined visual structure without overpowering the restrained interior layout.

Especially noticeable under:

• Ambient cabin lighting

• Direct daylight through the glass roof

• Nighttime interior reflections

Pairs naturally with carbon fiber dashboard trim, steering wheel accents, and side console components.

Before & After

Before installation, the factory console surface can appear visually flat against surrounding interior materials.

After installation:

• Sharper console definition

• Cleaner material transitions

• More technical surface texture

• Stronger focal contrast across the center cabin area

The visual change remains subtle from a distance and more noticeable during daily driving.

Installation

Non-destructive installation process.

Recommended steps:

1. Clean the console surface thoroughly

2. Ensure the area is fully dry

3. Test-fit before final placement

4. Apply even pressure during installation

No drilling or permanent modification required.

Cleaning

For regular maintenance:

• Use a soft microfiber towel

• Clean with mild interior cleaner

• Wipe dry after cleaning

Avoid:

• Abrasive pads

• Strong solvents

• Rough polishing compounds

Proper care helps preserve weave clarity and surface finish over time.

FAQ

Is this made from real dry carbon fiber?

Yes. The panel cover is constructed from real dry carbon fiber using an autoclave-cured process.

Will installation affect cup holder or console functionality?

No. The cover is developed around the factory console layout and does not interfere with normal operation or storage access.

Does the surface create excessive reflections inside the cabin?

The exposed weave creates controlled reflections and sharper material contrast rather than excessive glare.

Will the finish match other Tesla carbon fiber interior parts?

Yes. The weave pattern and finish are intended to pair naturally with other exposed carbon fiber interior components.

Does installation require permanent modification?

No. Installation is fully non-destructive and does not require drilling or permanent changes.